Dispensable thermal filler.
Contact us
Sending Email...
Contact person/s
Jonas Carlsson
Director of Global Sales - Automotive
+46 708 12 99 95
STANDARD PRODUCT
Compatherm® Filler
Compatherm® Filler
Dispensable thermal filler
Our filler is made using high-quality materials and developed to meet a growing need for reliable, cost-effective thermal solutions in high-tech industrial applications. Compatherm Filler is a liquid-dispensed thermal filler that can seamlessly conform to any arbitrary geometry and provide negligible component strain, while being highly adaptable to high-volume production.
Compatherm® Filler Benefits
- Excellent thermal performance
- Extremely conformable at low pressure
- Negligible component stress
- Low contact resistance
- Mitigate tolerances extremely well
- Machine-material integrated solutions available
- High-volume, cost-effective dispensing solution
- Customized solutions available
compatherm® FILLER material matrix & datasheet
| Test standard | Unit | 9263 | 9290 | |
|---|---|---|---|---|
| Base matrix | Silicone 1-part | Silicone 1-part | ||
| Thermally conductive filler | Ceramic | Ceramic | ||
| Color | Visual | Pink | Purple/Green | |
| Cure time @25°C | h | n/a | n/a | |
| Thermal Conductivity | ISO 22007-2 mod | W/(m-K) | 6 | 9 |
| Flowrate | 3.2mm nozzle @ 90 PSI | g/min | 39 | 26 |
| Density | ASTM D792 | g/cm3 | 3.3 | 3.16 |
| Outgassing, TML | ASTM E595 Modified | % | 0.1 | 0.08 |
| Dielectric Breakdown Voltage | ASTM D149 | VAC/mm | 6 000 | 6 000 |
| Test standard | Unit | 9343 | 9344 | 9360 | |
|---|---|---|---|---|---|
| Base matrix | Silicone 2-part | Silicone 2-part | Silicone 2-part | ||
| Thermally conductive filler | Ceramic | Ceramic | Ceramic | ||
| Color part A | Visual | White | White | White | |
| Color, part B | Visual | Pink | Geen/Pink | Green | |
| Pot life @25°C | h | 4 | 2.5 | 3 | |
| Cure time @25°C | h | 24 | 20 | 16 | |
| Thermal Conductivity | ISO 22007-2 mod | W/(m-K) | 4 | 4 | 6 |
| Viscosity (mixed) | Brookfield 20rpm | Pa-s | 350 | 300 | 1700* |
| Flow Rate | 2mm nozzle @ 50 PSI | g/min | 28 | 36 | 30 |
| Hardness | ASTM D2240 | Shore 00 | 70 | 40 | 70 |
| Density | ASTM D792 | g/cm3 | 3.1 | 3.1 | 3.1 |
| Volume Resistivity | ASTM D257 | Ω·cm | 9.4·10^12 | 2.2·10^14 | 3.09·10^14 |
| Dielectric Breakdown Voltage | ASTM D149 | VAC/mm | 5 000 | 8 000 | 10 000 |
| Dielectric Constand @ 1MHZ | ASTM D150 | 1.15 | 8.31 | 8.677 | |
| Outgassing, TML | ASTM E595 Modified | % | 0.1 | 0.1 | 0.14 |
| Flammability | UL94 (file: E483565) | % | V-0 |
You might also be interested in
STORIES
5G Street Macro for easy deployment
The challenges that operators have in metropolitan areas are to grow their capacity beyond what is possible on their rooftop macro sites. For this, our customer has introduced the Street Macro layer in the network model.
STANDARD PRODUCT
Thermal Interface Materials
Our thermal management portfolio and our leading expertise in this field provide you with support and solutions for optimal efficiency and cost savings in electronics cooling.
STORIES
Cool running with silicone-based thermal interface material
Some issues have been raised regarding silicone in electronics. Consequently, in spite of their often-disadvantageous aging, thermal stability, and stiffness properties, PLP TIM products with non-silicone-based matrices have been gaining in popularity. This article by the R&D department of Nolato Silikonteknik addresses these concerns and underlines the benefits offered by silicone: