Dispensable thermal filler.
Contact us
Sending Email...
Contact person/s
Jonas Carlsson
Director of Global Sales - Automotive
+46 708 12 99 95
STANDARD PRODUCT
Compatherm® Filler
Compatherm® Filler
Dispensable thermal filler
Our filler is made using high-quality materials and developed to meet a growing need for reliable, cost-effective thermal solutions in high-tech industrial applications. Compatherm Filler is a liquid-dispensed thermal filler that can seamlessly conform to any arbitrary geometry and provide negligible component strain, while being highly adaptable to high-volume production.
Compatherm® Filler Benefits
- Excellent thermal performance
- Extremely conformable at low pressure
- Negligible component stress
- Low contact resistance
- Mitigate tolerances extremely well
- Machine-material integrated solutions available
- High-volume, cost-effective dispensing solution
- Customized solutions available
compatherm® FILLER material matrix & datasheet
| Test standard | Unit | 9263 | 9290 | |
|---|---|---|---|---|
| Base matrix | Silicone 1-part | Silicone 1-part | ||
| Thermally conductive filler | Ceramic | Ceramic | ||
| Color | Visual | Pink | Purple/Green | |
| Cure time @25°C | h | n/a | n/a | |
| Thermal Conductivity | ISO 22007-2 mod | W/(m-K) | 6 | 9 |
| Flowrate | 3.2mm nozzle @ 90 PSI | g/min | 39 | 26 |
| Density | ASTM D792 | g/cm3 | 3.3 | 3.16 |
| Outgassing, TML | ASTM E595 Modified | % | 0.1 | 0.08 |
| Dielectric Breakdown Voltage | ASTM D149 | VAC/mm | 6 000 | 6 000 |
| Test standard | Unit | 9343 | 9344 | 9360 | |
|---|---|---|---|---|---|
| Base matrix | Silicone 2-part | Silicone 2-part | Silicone 2-part | ||
| Thermally conductive filler | Ceramic | Ceramic | Ceramic | ||
| Color part A | Visual | White | White | White | |
| Color, part B | Visual | Pink | Geen/Pink | Green | |
| Pot life @25°C | h | 4 | 2.5 | 3 | |
| Cure time @25°C | h | 24 | 20 | 16 | |
| Thermal Conductivity | ISO 22007-2 mod | W/(m-K) | 4 | 4 | 6 |
| Viscosity (mixed) | Brookfield 20rpm | Pa-s | 350 | 300 | 1700* |
| Flow Rate | 2mm nozzle @ 50 PSI | g/min | 28 | 36 | 30 |
| Hardness | ASTM D2240 | Shore 00 | 70 | 40 | 70 |
| Density | ASTM D792 | g/cm3 | 3.1 | 3.1 | 3.1 |
| Volume Resistivity | ASTM D257 | Ω·cm | 9.4·10^12 | 2.2·10^14 | 3.09·10^14 |
| Dielectric Breakdown Voltage | ASTM D149 | VAC/mm | 5 000 | 8 000 | 10 000 |
| Dielectric Constand @ 1MHZ | ASTM D150 | 1.15 | 8.31 | 8.677 | |
| Outgassing, TML | ASTM E595 Modified | % | 0.1 | 0.1 | 0.14 |
| Flammability | UL94 (file: E483565) | % | V-0 |
You might also be interested in
STANDARD PRODUCT
Compatherm® Paste
Compatherm Paste creates the thinnest possible film between the heat source and heat sink to provide minimal thermal resistance. Compatherm Paste allows a bond line thickness of as little as a few tenths of a micron.
STORIES
Cool running with silicone-based thermal interface material
Some issues have been raised regarding silicone in electronics. Consequently, in spite of their often-disadvantageous aging, thermal stability, and stiffness properties, PLP TIM products with non-silicone-based matrices have been gaining in popularity. This article by the R&D department of Nolato Silikonteknik addresses these concerns and underlines the benefits offered by silicone:
STANDARD PRODUCTS
Compashield-Molded and extruded EMI shielding gaskets
Our own brand for molded and extruded EMI shielding gaskets in the form of cans, frames, tubes, sheets and components.