Contact us

Sending Email...

Valid input required
Valid input required
Valid input required
Valid input required
Valid input required
Valid input required

Contact person/s

Jonas Carlsson sales Nolato Silikonteknik

Jonas Carlsson

Director Global Sales

[email protected]

+46 708 12 99 95

STANDARD PRODUCT

Compashield SMT Grounding Pad

Nolato delivers flexible SMT grounding pads and EMI shielding solutions. Engineered for demanding electronics applications, our products provide reliable electrical performance and durability under mechanical and environmental stress.

Contact us
Nolato’s Compashield SMT Grounding Pad is a compact, surface-mount solution that provides effective EMI shielding and grounding in automotive and high-performance electronics. In addition to electrical functionality, its flexible and compressible design helps absorb mechanical tolerances and bridge gaps between PCBs and housing. Developed to perform reliably under mechanical and environmental stress, it supports long-term electrical contact in demanding applications.
COMPASHIELD® SMT GROUNDING PAD

Key features and benefits

The flexible and easily compressible SMT Pad can take up tolerances and close the gap between a PCB and other contacting surfaces, in addition to providing a reliable grounding contact.

Optimized PCB space utilization

Large contact area vs metal spring provides a better utilization of the PCB area and creates space for more components.

Secure chemical bonding for long-term stability

Excellent chemical bonding between the gasket and the solderable metal strip which guarantees that the SMT Pad stays in position on the PCB during the full life cycle.

Accurate SMT Pad positioning during soldering

The large bottom termination ensures the correct positioning throughout the soldering process and leaves strong solder joint.

Enhanced vibration resistance with superior compression recovery

Superior bounce back and compression set makes the product vibrations safe and have full electrical contact, even if the conditions are tough.

Thermal durability with crack resistance

No risk for cracks, regardless compression degree, caused by high temperature or extreme temperature fluctuations.

Non-abrasive contact surface protection

The non-abrasive SMT Pad ensures no scratching on the contacting surface.

Metal spring and gasket replacement solution

Replaces most metal springs & fabric/foil gaskets, simplifying design and component selection.

Low electrical resistance for optimal performance

Soft and flexible body with a low electrical resistance and low compression force.

High-quality production with vision-controlled inspection

The production takes place in a clean and controlled environment and each individual SMT Pad is vision controlled before packaging into Tape-and-Reel.
Network card with Compashield SMT Pad on.

COMPASHIELD® SMT GROUNDING PAD

Product characteristics

The Compashield SMT Pad has a hollow profile with a core of soft silicone rubber and a shell of electrically conductive silicone rubber.
Mixed SMT Pad products.
Network card with Compashield SMT Pad on.

Nolato Expertise

Nolato has deep expertise in EMI shielding and grounding solutions, specializing in flexible SMT pads designed for demanding electronics applications. Our knowledge in material science and manufacturing ensures that Compashield SMT Grounding Pads deliver reliable electrical performance, excellent vibration resistance, and long-term durability. Compashield SMT Pads provide cost-effective and high-quality EMI protection for a wide range of industries.

COMPASHIELD® SMT GROUNDING PAD

Applications

The Compashield SMT Pad is used as a grounding contact on printed circuit boards commonly used in Automotive and Electronics industry, Advanced driver assistance systems, cameras, radars, infotainment systems, power-train electronics and ECUs.

Compashield® is our own brand for molded and extruded EMI shielding gaskets in the form of cans, frames, tubes, sheets and components. The technique involves molding or extruding.

 

COMPASHIELD® SMT GROUNDING PAD

Do you have grounding or EMI challenges?

As a design engineer you work with various design challenges. Now and then you can encounter problems with interference that can be difficult to catch.

The causes of EMI are numerous and include both man-made and natural sources. The results can range from temporary disturbances and data losses to system failure and even loss of life.

Our products can help you to solve your grounding and EMI challenges, just order FREE samples to be able to do some tests. 

Order free samples

SMT-EMI-Pad products

Matrix & downloads

COMPASHIELD® SMT GROUNDING PAD - PROPERTIES AND DIMENSIONS
Compashield SMT Pad matrix
Compashiel SMT Pad products[No text in field]

Order free product samples from our material guides

Explore our EMI and thermal technologies hands-on. We offer a curated selection of product samples featured in our material guides - including examples based on Trishield and Compathern. Use them to evaluate form, function and performance early in your development process.

 See our guides

Images on EMC and Thermal products

You might also be interested in

Explore all our stories